WB200
Wet Bulb Hygro-Thermometer Datalogger
Portable Hygro-Thermometer with Wet Bulb and Dew Point Temperature readings
Specifications |
Range |
LCD Display |
7-segment digit type for readings and messages |
Function icons above and below reading for units and mode status |
|
Low battery indication |
|
LED status indicator |
Flashes red in an Alarm condition |
Flashes green when a reading is logged |
|
Audible Alert |
Sounds intermittently when in an Alarm condition |
Response time |
120 second update rate |
Temperature Units |
Switchable Temperature units (° C/° F) |
Measurement ranges |
Temperature (air, wet bulb, dew point): 5 to 50° C (41 to 122° F) |
Relative Humidity: 0.0 to 99.9% |
|
Resolution |
0.1° C/F (air, dew point, and wet bulb temperature) |
0.1% Relative Humidity |
|
Accuracy |
RH: ± 3% (10 to 90%RH @ 25° C; ± 5% outside of this range) |
Air, Dew Point, and Wet Bulb Temperature: ± 0.6° C (1° F) |
|
Datalogger memory |
Up to 100 reading sets (each set includes one measurement from each of the four measurement modes). Recall readings directly on the meter's LCD display. The internal memory is non-volatile. |
Datalogging sample rate |
Programmable from 15 minutes to 60 minutes in 5 minute increments |
Over range indication |
"E3" appears on the LCD |
Under range indication |
"E2" appears on the LCD |
Low battery indication |
Empty battery symbol appears on the LCD |
Water tank capacity |
120ml (4 oz.) |
Power supply |
Four (4) 1.5V 'AAA' batteries or 5V universal power adaptor (included) |
LCD Dimensions |
24 (H) x 40 (W) mm / (0.94 x 1.58'') |
Meter Dimensions |
70.8 (top cover) x 77.6 (bottom cover) x 177 (H) mm / (2.8 x 3.1 x 7.0'') |
Weight |
250g (8.0 oz.) with batteries installed |